XINXIANG DEGONG MACHINERY CO., LTD. رافعة علوية ثقيلة للبيع,رافعة Eot الثقيلة للبيع,رافعة جسرية ثقيلة

رافعة علوية ذات معايير أوروبية ثقيلة للبيع

حصة ل:  
    سعر الوحدة: USD 2700 - 800 / Set/Sets
    الدفع نوع: L/C,T/T,Paypal,Western Union
    إنكوترم: FOB,CFR,CIF,EXW,FCA,CPT
    أدني كمية الطلب: 1 Set/Sets

معلومات أساسية

نموذجLDC, LD, LDP, HD

علامة تجاريةDGCrane

Additional Info

تفاصيل التعبئة والتغليفيتم تعبئة الرافعة الكهربائية بواسطة صندوق صندوق الخشب الرقائقي ، والبعض الآخر معبأ بأقمشة غير منسوجة

إنتاجية1500sets/month

نقلOcean,Land

مكان المنشأالصين

الدعم18000 sets/year

الشهاداتISO

رمز النظام المنسق84261120

ميناءQingdao Port,Tianjin Port,Shanghai Port

الدفع نوعL/C,T/T,Paypal,Western Union

إنكوترمFOB,CFR,CIF,EXW,FCA,CPT

وصف المنتج

مقدمة موجزة للرافعة العلوية القياسية الأوروبية الثقيلة للبيع

واحدة العارضة جسر الرافعة هو رافعة جسر علوي يحتوي على أحد العارضة الجسر الذي يدعم العربة ورفع. ركوب العربة والرافعة على الحافة السفلية لعارضة الجسر. تعتبر الرافعة الجسرية ذات العارضة الواحدة تعمل من الأعلى عند ركوب عارضة الجسر فوق عوارض المدرج.

التطبيق: عادة ما تستخدم هذه الرافعة في الداخل ، مثل ورشة العمل ، المصنع ، حظيرة الماشية ، وما إلى ذلك لرفع البضائع. يحظر استخدام المعدات في بيئة قابلة للاحتراق أو المتفجرة أو المسببة للتآكل.

10tons Bridge Crane
  • حلول لظروف ورشة العمل المختلفة

10tons Bridge Crane

نوع الإرتفاع المنخفض رافعة جسرية أحادية العارضة

توجد ورشة عمل بارتفاع محدود من الدعامة إلى الأرض ، ولكنها تحتاج إلى ارتفاع رفع أعلى ، ثم سنقوم بتصميم الرافعة مع عارضة مربعة الشكل ورافعة منخفضة الارتفاع ، والتي ستكون ذات ارتفاع رفع أعلى.

10tons Bridge Crane

نوع التعليق رافعة جسر عارضة واحدة

بالنسبة لبعض الورش ، توجد عوارض خرسانية في السقف ، ولكن لا توجد أعمدة. وفقًا للاحتياجات العملية ، هناك حاجة إلى رافعة علوية ، لذلك سنقترح رافعة من النوع المعلق معلقة على العارضة الخرسانية إذا كان السقف يمكن أن يتحمل الوزن الكافي.

10tons Bridge Crane

نوع أوروبي واحد العارضة جسر الرافعة

بالنسبة لورشة المنتجات عالية التقنية ، أو إذا كان لديك متطلبات منخفضة الضوضاء ، يوصى باستخدام الرافعة الأوروبية.

10tons Bridge Crane

رافعة جسرية ذات عارضة واحدة معلقة من الجانب

في بعض ورش العمل ، يكون ارتفاع العمود محدودًا ، ولكن هناك مساحة كبيرة من أعلى العمود إلى السقف. وفقًا لهذه الحالة ، سنقدم رافعة من النوع المعلق الجانبي مع رافعة معلقة جانبية ، مما يجعل ارتفاع الرفع أعلى.

  • وصف مفصل للمكونات

10tons Bridge Crane

10tons Bridge Crane

10tons Bridge Crane

  • تدفق الإنتاج

10tons Bridge Crane

Incoming  material 

test

Every batch of raw materials must be tested when they enter the factory. We set up a special testing room.It covers non-destructive inspection room, metallographic analysis and hardness inspection room, mechanics inspection and chemical inspection room. Testing methods has non-destructive testing,metallographic analysis, mechanical testing and chemical analysis, mainly testing and control of the raw materials, crane components, product

Uncoiling 

and flattening the steel plate  

After uncoiling, leveling, sizing and shearing, the required length and width of the flat sheet can  be obtained, which can protect the flat sheet without scars, high shearing accuracy, double      palletizing and discharging, high efficiency and speed.
Pressure    Groove  According to crane specifications to groove pressing with different model, and main girder forming at one time can realize that the U-groove of the whole main girder of single girder crane has no butt weld, thus reducing stress concentration point, improving the strength and stiffness of the main girder, and greatly improving the comprehensive bearing capacity of the main girder.
Welding  Stiffener There is a support which can keep the main girder be not deformed, and workers can work easily without bending.
Welding main beam with the ending     
Welding I  beam and  ventral            Submerged arc welding (SAW) is a kind of protective welding with Rohm double gun automatic welding, which has the advantages of full weld, deep molten pool, beautiful shape and high welding quality. At the same time, the welding distortion is reduced.
Checking  span,welding  flange In production, the hanging plates of the main girder and the end girder are processed together, punched together, and then knock down from end beam and weld to the main girder.
Painting Two-layer primer, two-layer paint

  • التعبئة والتسليم

Steel parts Steel parts are packed in polythene woven cloth, which can prevent rainwater from directly contacting the crane and protect the painting
Electric parts and hoist Electric parts are packed by strong plywood crate case, which plays a protective and moistureproof role.

  • حالات التثبيت

10tons Bridge Crane
10tons Bridge Crane
10tons Bridge Crane

  • المعلومات اللازمة للحصول على السعر

Basic informations needed of single girder overhead crane 1. Capacity:_  ( max weight of material)
2. Span:_ ( rail center to rail center)
3. Lifting height:_ ( from ground to hook)
4. Crane traveling legnth:_
5. What goods will the crane lift?
6. Working environment:
7. Speed requirement:
8. Comtrol method: control pendent, remote control, cabin control ( normally choose controll pendent and remote control)  

صورة المنتج
  • رافعة علوية ذات معايير أوروبية ثقيلة للبيع
  • رافعة علوية ذات معايير أوروبية ثقيلة للبيع
  • رافعة علوية ذات معايير أوروبية ثقيلة للبيع
  • رافعة علوية ذات معايير أوروبية ثقيلة للبيع
  • رافعة علوية ذات معايير أوروبية ثقيلة للبيع
البريد الإلكتروني لهذا المورد
  • *الموضوع:
  • إلى:
    Michael
    Mr. Michael
  • *رسائل:
    يجب أن تكون رسالتك بين 20-8000 الأحرف
قائمة المنتجات ذات الصلة

اشترك في النشرة الإلكترونية:
الحصول على التحديثات، خصومات وعروض خاصة وجوائز كبيرة!

متعدد اللغات:
حق النشر © 2024 XINXIANG DEGONG MACHINERY CO., LTD.حق الطبعة الملكية
التواصل مع مزود؟المزود
Michael Mr. Michael
ماذا يمكنني أن أفعل لك؟
الاتصال المورد